-
CeboTime & CeboTime Active
Acrylic finish for interiors with a matt and delicately pearly appearance, easy to apply.
Acrylic Finishes
CeboTime & CeboTime Active
Water-based acrylic finish for interiors, with low dirt pick-up and high mechanical resistance. With a matt and delicately pearly appearance, easy to apply, it allows you to obtain light, sharp and bright colours, but also very intense shades. The multiple color possibilities make CeboTime a versatile and easily usable finish for enhancing both classic and modern environments. Can be used on all types of appropriately prepared supports.
ACTIVE Line: ACTIVE PROTECTION AGAINST MOLD AND BACTERIA!CeboTime in the ACTIVE version, enriched with silver ions, combine the technical and aesthetic qualities of the product with a long-lasting bactericidal and bacteriostatic function, eliminating over 99% of the bacteria present on the treated surfaces . (tests carried out according to ISO 22196:2011).
Please note
The technical characteristics of the ACTIVE Base will cause a slight difference in white with the other CeboTime Base and also a slight difference in color. It is essential to start and complete the work with the same product and production batch.
Surface treatment
Check that the supports are uniform, perfectly clean and dry. In the presence of recent shavings, chalky or absorbent surfaces, clean them perfectly and first apply the CeboFix M insulating fixative in one hand, with a brush, diluted 1:1 with water.
FondoPlus: water-based acrylic primer, with high coverage and whiteness. After carefully preparing the support, apply the product with a short-haired roller, in one or two hands, until completely covered. Once FondoPlus has dried, proceed with the application of CeboTime.
CeboGliss: interior paste additive, based on laminated glitter that added to CeboTime gives the finish a sparkling appearance. Add CeboGliss within 6 days of finishing: Use the additive within 6 days.
CeboTime application
Pennellato (Brush) effect: apply the finish with the CeboSi Brush, (2.5 and 4 inches) or with the Cebos Plafoncino (3x7 and 3x10 cm): proceed with crossed brush strokes distributing the product evenly over the entire surface and avoiding sharp squares. To obtain a more compact effect with less evident brush strokes, once the first coat has dried (4-6 hours) it is possible to apply a second coat of product keeping in mind that this further step will make the color slightly more intense.
Sfumato (Shaded) effect: apply the finish with the Cebosi Brush or with the Cebos Plafoncino, proceeding with crossed brushstrokes: after 3-4 m2, while the product is still wet, go over the surface with the polycarbonate trowel, following the process previously created. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.
Rigato (Striped) effect: apply the finish with the Cebos Plafoncino, proceeding with vertical or horizontal brush strokes for a band of approximately 50 cm: then go over the treated surface using the "edge" Plafoncino to better highlight the design. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.
Check that the supports are uniform, perfectly clean and dry. In the presence of recent shavings, chalky or absorbent surfaces, clean them perfectly and first apply the CeboFix M insulating fixative in one hand, with a brush, diluted 1:1 with water.
FondoPlus: water-based acrylic primer, with high coverage and whiteness. After carefully preparing the support, apply the product with a short-haired roller, in one or two hands, until completely covered. Once FondoPlus has dried, proceed with the application of CeboTime.
CeboGliss: interior paste additive, based on laminated glitter that added to CeboTime gives the finish a sparkling appearance. Add CeboGliss within 6 days of finishing: Use the additive within 6 days.
CeboTime application
Pennellato (Brush) effect: apply the finish with the CeboSi Brush, (2.5 and 4 inches) or with the Cebos Plafoncino (3x7 and 3x10 cm): proceed with crossed brush strokes distributing the product evenly over the entire surface and avoiding sharp squares. To obtain a more compact effect with less evident brush strokes, once the first coat has dried (4-6 hours) it is possible to apply a second coat of product keeping in mind that this further step will make the color slightly more intense.
Sfumato (Shaded) effect: apply the finish with the Cebosi Brush or with the Cebos Plafoncino, proceeding with crossed brushstrokes: after 3-4 m2, while the product is still wet, go over the surface with the polycarbonate trowel, following the process previously created. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.
Rigato (Striped) effect: apply the finish with the Cebos Plafoncino, proceeding with vertical or horizontal brush strokes for a band of approximately 50 cm: then go over the treated surface using the "edge" Plafoncino to better highlight the design. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.
-
product use dilution (water) approx.coverage tool drying time colour fixative CeboFix M interior 1:1 10 m2/L 
4-6 h transparent base coat FondoPlus interior 10% 8-10 m2/L 
6-8h white finish coat CeboTime - CeboTime Active interior ready to use 10 m2/L (one coat) - 7 m2/L (two coat) 
4-6 h CeboKit & CeboCol
-
If more than one pack has to be produced in the same color, it is advisable to use bases and colorants carrying the same batch number.
CEBOTIME CEBOKIT: /05 /1 /4 CeboGliss 5 L 1x25 ml 1x100 ml 2X100 ml 2x225 ml 2,5 L 12,5 ml 2x25 ml 1x100 ml 1x225 ml 1 L 5 ml 20 ml 40 ml 1x90 ml
↑