Brushed Effect: apply the finish with the CeboStyle Antico Plafoncino available in the 3x7 - 3x10 formats or with the Brush CeboSi, proceeding with crossed brushstrokes and avoiding clear squaring. After 4-6 hours and in any case after drying of the first coat, apply the second coat in the same way.

Shaded effect: apply the finish with the CeboStyle Antico Plafoncino or the CeboSi Brush, proceeding with crossed brushstrokes or vertical or horizontal or oblique: after 3/4 m2, while the product is still wet, go over the treated surface again with the Trowel in rectangular or polygonal polycarbonate (A/19 - A/20), following the previously created process. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.

Striped effect: apply the finish with the CeboStyle Antico Plafoncino, proceeding with vertical brush strokes for a band of 50 cm approximately: then go over the treated surface using the CeboStyle Antico "edge" Plafoncino to better highlight the design. After 4-6 hours and in any case once the first coat has dried, apply the second coat in the same way.

Check that the supports are uniform, perfectly clean and dry. In the presence of recent shaving, chalky or absorbent foundations carry out a perfect cleaning of the support and previously apply the CeboFix M insulating fixative in one hand, with a brush, diluted 1:1 with water.

FondoPlus: water-based acrylic primer, with high coverage and whiteness. After careful cleaning and grouting or any smoothing the surface, apply the product with a short-haired roller, in one or two coats, until the surface is completely covered. Once FondoPlus has dried, proceed with the application of CeboStyle Antico.

CeboGliss: interior paste additive, based on laminated glitter that added to CeboStyle Antico gives the finish a sparkling appearance. Add CeboGliss within 6 days of finishing: Use the additive within 6 days.

CeboIdea: water-based acrylic microcoating for interiors, smooth and compact, which allows the creation of effects that give on the walls a high depth and three-dimensionality of the design. CeboIdea can be applied with a stainless steel trowel (A/39-A/40) or with a polycarbonate trowel available in the polygonal or rectangular format (A/19-A/20) and, before complete drying, it can be slightly smoothed with the Caress Spatula (A/38). CeboIdea is easily sandable, once dry occurred, to eliminate any imperfections and to refine the various effects before the subsequent application of CeboStyle Antico.

Cloud effect: apply CeboIdea, colored in the same shade as CeboStyle Antico, with the polycarbonate trowel (A/19-A/20), in a homogeneous thickness of 1-2 mm: after 2/3 m2, while  the product is still wet, go over the treated surface again with the same trowel with circular and uniform movements. Wait for CeboIdea to dry completely (6-8 hours) and sand to remove any imperfections. Then apply 2 coats of CeboStyle Antico with the CeboStyle Antico ceiling following the direction of the processing accomplished.

Horizontal Zeffiro effect: apply CeboIdea, colored in the same shade as CeboStyle Antico, with the chosen trowel, in one homogeneous thickness of 1-2 mm: work the product before drying with the CeboSign tool (A35-A/36) to obtain horizontal grooves and lightly smooth them in the direction of the work carried out with the Caress Spatula. Proceed with the drafting and  subsequent processing in 1 m bands. about. Wait for CeboIdea to dry completely (6-8 hours) e sand to eliminate any imperfections. Then apply 2 coats of CeboStyle Antico with the CeboStyle Antico ceiling following the direction of the work carried out.

Vertical wave effect: apply CeboIdea, colored in the same shade as CeboStyle Antico, with the chosen trowel, in a thickness homogeneous of 1-2 mm: work the product before drying with the “Onda 4” tool (A/56) following the vertical direction and carry out a light smoothing in the direction of the work carried out with the Caress spatula. Proceed with the subsequent drafting worked in 1 m bands. about. Wait for CeboIdea to dry completely (6-8 hours) and sand to remove any imperfections. Then apply 2 coats of CeboStyle Antico with the CeboStyle Antico ceiling following the direction of the processing accomplished.

Vertical Wood Effect: apply CeboIdea, colored in the same shade as CeboStyle Antico, with the chosen trowel, in a thickness homogeneous by 1-2 mm, making long and vertical strokes: work the product before drying with the "Finto" tool Wood” (A/29) following the vertical direction. Proceed with the drafting and subsequent processing in bands of 2 meters and a height of approximately 90 cm. Wait for CeboIdea to dry completely (6-8 hours) and sand to eliminate any imperfections. Then apply 2 hands of CeboStyle Antico with the CeboStyle Antico ceiling following the direction of the workmanship carried out.

Moon Effect: apply CeboIdea, colored in the same shade as CeboStyle Antico with the chosen trowel, in a uniform thickness of 1-2 mm, making crossed spatula strokes: after 2/3 m2, while the product is still wet, dab either with the CeboSign tool (A35) or with a sea sponge, the surface in an irregular manner leaving smooth areas and worked areas and smooth with the Caress spatula: proceed therefore with processing. Wait for CeboIdea to dry completely (6-8 hours) and sand to eliminate imperfections. Then apply 2 coats of CeboStyle Antico with the CeboStyle Plafoncino, creating the Sfumato effect.

Three-dimensional effects: on a smooth surface, prepared with FondoPlus or smoothed with CeboIdea, plumb and fix the stencil (CeboDesign) on the wall with adhesive paper tape: apply CeboIdea, colored in the same shade as CeboStyle Antico, with the polycarbonate trowel (A19-A/20) in a thickness of 1-2 mm, taking care to evenly cover the stencil starting from the sides towards the center and being careful not to dirty the back of the stencil. Then place a second stencil next to it and proceed as above, repeating the operation as many times as necessary. It is recommended to remove the stencil while the product is still wet: any imperfections can be sanded when the surface is dry. Once dry, proceed with the application of CeboStyle Antique as previously indicated. To apply the shaped stencils (CeboDesign 351-352-353) follow the  instructions indicated in the dedicated Catalogue.