Interior use of CeboIron Cromo on FondoPlus, a water-based acrylic primer with high coverage and whiteness. All gypsum, lime and civil surfaces are suitable. Check that the surfaces are perfectly clean, dry and uniform in appearance and absorption. In the presence of recent skimming, chalking or absorbent surfaces, thoroughly clean the surface and first apply the CeboFix M insulating fixative in one coat, with a brush, diluted 1:1 with water. Apply FondoPlus, diluted 10% with water, with a short-haired roller, in one or two coats, until the surface is completely covered. Once dry, apply CeboIron Cromo in two coats with the Cebos ceiling paint: work with crossed brush strokes, avoiding sharp squares. Once the first coat is completely dry, apply the second coat in the same way.

Exterior use of CeboIron Cromo on CeboFix R, a white pigmented water-based primer based on acrylic resin and quartz. All gypsum, lime and civil surfaces are suitable. Check that the surfaces are perfectly clean, dry and uniform in appearance and absorption. Apply CeboFix R, diluted 20-30% with water, with a short-haired roller in one or two coats to make the surface uniform. Once dry, apply CeboIron Cromo in two coats with the Cebos ceiling brush: work with crossed brush strokes, avoiding sharp squares. Once the first coat is completely dry, apply the second coat in the same way.

External use of CeboIron Cromo on CeboStone, water-based acrylic base and finish, with a surface appearance with light sandy reliefs. On completely dry CeboFix R, apply a coat of CeboStone with the Cebos ceiling brush and work the product with crossed brush strokes to obtain an alternation of rustic and smoother areas. Once CeboStone is dry, apply CeboIron Cromo in two coats with the Cebos plasterboard, working with crossed brush strokes, avoiding sharp squares. Once the first coat is dry, apply the second coat in the same way.

External use of CeboIron Cromo on CeboStrong, water-based acrylic coating for creating material effects.
SBRECCIATO effect: on a completely dry CeboFix R, apply the first coat of CeboStrong and carefully smooth the surface. Once the first coat is dry, apply CeboStrong vertically or horizontally in a uniform thickness, using the toothed side of the Shark 3 steel trowel; then smooth the product using the smooth sides of the same trowel. While the product is still wet, dab or score with the CeboSign tool in an irregular manner, always respecting the direction of the work. Before it is completely dry, smooth the surface with the steel trowel, slightly pressing down on the raised parts. If the product is too dry, moisten with sprayed water. Once CeboStrong is completely dry, apply CeboIron Cromo in two coats with the small brush, following the direction of the previously created design and blending with a synthetic sponge. Once the first coat is completely dry, apply the second coat in the same way.
SPATOLATO effect: on a completely dry CeboFix R, apply the first coat of CeboStrong and carefully smooth the surface. Once the first coat is dry, apply CeboStrong with a steel trowel and create the desired aesthetic effect by working with crisscross and irregular strokes. Before it is completely dry, go over the surface again to slightly flatten the raised parts. If the product is too dry, moisten with sprayed water. Once CeboStrong is completely dry, apply CeboIron Cromo in two coats with the Cebos small brush, proceeding with crisscross brush strokes and blending with a synthetic sponge. Once the first coat is completely dry, apply the second coat in the same way.