-
CeboArt Stucco and Marmorino
From the timeless Stucco to the classic Marmorino, the finishes based on natural lime.
Mineral Lime
CeboArt Stucco and Marmorino
CeboArt Stucco: fine finishing stucco for interiors, based on slaked lime, which naturally guarantees high breathability and resistance to mold and bacteria. CeboArt Stucco allows you to easily create the authentic effect of Venetian Stucco, for decorations with timeless elegance.
CeboArt Marmorino: mineral decorative coating for interiors, based on lime putty and marble dust, which has high breathability and resistance to mold and bacteria. CeboArt Marmorino allows you to create high quality finishes with a delicately marbled and speckled appearance.
Surface treatment:
All gypsum, lime and civil bases are suitable. Check that the supports are perfectly clean, dry and uniform in appearance and absorption; in the case of civil or rustic floors it is necessary to intervene with appropriate smoothing. Then apply CeboFix R, a breathable pigmented fixative containing quartz flour, in one or two coats with a short-haired roller, after dilution with water at 20-30%.
CeboArt Stucco application cycle
CeboArt Stucco is applied in three coats with a stainless steel trowel. On the prepared and completely dry surface, apply a good quantity of product in the first coat and smooth until a perfectly smooth surface is obtained. Once the first coat has dried (6-8 hours), apply the second coat with a trowel or stainless steel blade, to create the desired decoration and smooth it perfectly. In the third coat, apply a small amount of product, slightly softened, spreading it and removing it; before complete drying, polish the surface by passing it with a stainless steel trowel.
CeboArt Marmorino application cycle
CeboArt Marmorino is applied in two coats with a stainless steel trowel. On the prepared and completely dry substrate, apply a first coat of product: once dry, apply the second coat, compacting it. Before complete drying, go over the surface with the steel trowel, to give CeboArt Marmorino its characteristic appearance and highlight its delicate stippling.
EcoCera: natural water-based wax for interiors based on white beeswax and Marseille soap, which provides water-repellence and increases the natural shine of the surfaces. Mix the product carefully before application: if it is thick, dilute it with 5% hot water. Apply EcoCera only after CeboArt Stucco or Marmorino has completely dried. Spread the product with a synthetic sponge, avoiding excessive loads of material; within 30-40 minutes polish by hand with a woolen cloth.
CeboWax: transparent water-based finish, for interiors, based on natural beeswax and selected binders, breathable and water-repellent. It allows you to give considerable brilliance to surfaces created with CeboArt Stucco and Marmorino. Apply a coat of CeboWax diluted 1:1 with water, with a synthetic sponge; immediately afterwards, with a soft cloth, go over the surface to remove excess wax. Wait 10-15 minutes and polish the surface by repeatedly passing the perfectly clean steel trowel, exerting adequate pressure. It is recommended to mix the product during processing.
CeboSil: breathable and water-repellent acrylic-siloxane protective finish with a matt appearance and velvety to the touch. Dilute the product in a 1:1 ratio with water. CeboSil is applied in one hand with a synthetic sponge, proceeding from bottom to top to avoid dripping.
All gypsum, lime and civil bases are suitable. Check that the supports are perfectly clean, dry and uniform in appearance and absorption; in the case of civil or rustic floors it is necessary to intervene with appropriate smoothing. Then apply CeboFix R, a breathable pigmented fixative containing quartz flour, in one or two coats with a short-haired roller, after dilution with water at 20-30%.
CeboArt Stucco application cycle
CeboArt Stucco is applied in three coats with a stainless steel trowel. On the prepared and completely dry surface, apply a good quantity of product in the first coat and smooth until a perfectly smooth surface is obtained. Once the first coat has dried (6-8 hours), apply the second coat with a trowel or stainless steel blade, to create the desired decoration and smooth it perfectly. In the third coat, apply a small amount of product, slightly softened, spreading it and removing it; before complete drying, polish the surface by passing it with a stainless steel trowel.
CeboArt Marmorino application cycle
CeboArt Marmorino is applied in two coats with a stainless steel trowel. On the prepared and completely dry substrate, apply a first coat of product: once dry, apply the second coat, compacting it. Before complete drying, go over the surface with the steel trowel, to give CeboArt Marmorino its characteristic appearance and highlight its delicate stippling.
EcoCera: natural water-based wax for interiors based on white beeswax and Marseille soap, which provides water-repellence and increases the natural shine of the surfaces. Mix the product carefully before application: if it is thick, dilute it with 5% hot water. Apply EcoCera only after CeboArt Stucco or Marmorino has completely dried. Spread the product with a synthetic sponge, avoiding excessive loads of material; within 30-40 minutes polish by hand with a woolen cloth.
CeboWax: transparent water-based finish, for interiors, based on natural beeswax and selected binders, breathable and water-repellent. It allows you to give considerable brilliance to surfaces created with CeboArt Stucco and Marmorino. Apply a coat of CeboWax diluted 1:1 with water, with a synthetic sponge; immediately afterwards, with a soft cloth, go over the surface to remove excess wax. Wait 10-15 minutes and polish the surface by repeatedly passing the perfectly clean steel trowel, exerting adequate pressure. It is recommended to mix the product during processing.
CeboSil: breathable and water-repellent acrylic-siloxane protective finish with a matt appearance and velvety to the touch. Dilute the product in a 1:1 ratio with water. CeboSil is applied in one hand with a synthetic sponge, proceeding from bottom to top to avoid dripping.
Please note: The colors in the reference color chart can be created with both CeboArt Stucco and CeboArt Marmorino: keep in mind that the different composition of the products can slightly modify the shade of the same colour.
-
product use dilution (water) approx.coverage tool drying time colour base coat CeboFix R interior 20-30% 10-12 m2/L 
min. 24 h. white finish coat CeboArt Stucco interior ready to use 2 m2/kg 
min. 24 h CeboKit & CeboCol finish coat CeboArt Marmorino interior ready to use 0,81-1 m2/kg
min. 24 h CeboKit & CeboCol protective EcoCera interior 5% max 30 m2/L 
4-6 h transparent protective CeboWax interior 1:1 12-14 m2/L
4-6 h transparent protective CeboSil interior 1:1 10 m2/L
4-6 h transparent
-
If more than one pack has to be produced in the same color, it is advisable to use bases and colorants carrying the same batch number.
CEBOART STUCCO CEBOKIT: T M F SERIE 300: 301-308 20 KG 100 ml 200 ml 400 ml 4x300 ml 5 KG 25 ml 50 ml 100 ml 300 ml 2 KG 10 ml 20 ml 40 ml 120 ml
CEBOART MARMORINO CEBOKIT: T M F SERIE 300: 301-308 20 KG 100 ml 200 ml 400 ml 4x300 ml 5 KG 25 ml 50 ml 100 ml 300 ml 2 KG 10 ml 20 ml 40 ml 120 ml
↑