Surface treatment

All gypsum, lime and civil bases are suitable. Check that the supports are perfectly clean, dry and uniform in appearance and absorption. CeboFix R: breathable pigmented fixative, containing quartz flour. CeboFix R is applied in one hand with a short-haired roller. Once CeboFix R has dried, in the case of particularly rustic or irregular surfaces, apply the CeboFondo lime-based smoothing coat.

CeboArt Pozzolano

Lamato effect application cycle:

On the suitably prepared substrate, apply a first coat of CeboArt Pozzolano with a stainless steel trowel with crossed and irregular strokes. Once dry, apply the second coat, compacting the product more or less depending on the desired final effect (more or less closed). If the surface is too dry, wet the trowel with water.

Application cycle for Lamato Lucente effect:

On the suitably prepared base, apply the first coat of CeboArt Pozzolano as described above. Once dry, mix CeboLamè with CeboArt Pozzolano and proceed with the application of the second coat.

Travertino effect application cycle:

Apply CeboArt Pozzolano with a stainless steel trowel in a uniform thickness of 1-2 mm. While the product is still wet, work the surface with the special 12x12 cm CeboSign tool (A/35) to recreate the characteristic veins of travertine. To obtain a more natural effect, proceed with the work in an irregular manner, avoiding repetition of the design. Before the product is completely dry, smooth the surface with the trowel, lightly crushing the raised parts. If the product is too dry, wet the trowel with water.

CeboArt CalceFine

Levigato effect application cycle:

On the prepared and completely dry surface, apply a first coat of CalceFine with a stainless steel trowel with crossed and irregular strokes. Once dry, apply the second coat, compacting the product.

Levigato Lucente effect application cycle:

On the prepared and completely dry substrate, apply the first coat of CalceFine as described above. Once dry, mix CeboLamè with CeboArt CalceFine and proceed with the application of the second coat, compacting the product.

CeboSil: breathable and water-repellent acrylic-siloxane protective finish with a matt appearance and velvety to the touch. Dilute the product with water in a 1:1 ratio. CeboSil is applied in one hand with a synthetic sponge, proceeding from bottom to top to avoid dripping.

CeboMika: special flake additive based on natural mica which, when added to CeboArt Pozzolano or CeboArt CalceFine, creates elegant highlights in the finish. CeboMika is available in Silver and Gold shades in 25 ml and 100 ml packs to be used in the following dosages: 1 x 100 ml in a 20 kg tin - 1 x 25 ml in a 5 kg tin.